Width: 14.1" Height: 19.6" Depth: 25.1" Weight: 115 lbs. Room Capacity: Up to 1,500 cu. ft. Power: 115V AC / 60 Hz Power Cord: 8' 16-Gauge, Exits from the Rear Amps: 11.8 AMPS

CellarPro wine cooling units outperform the competition in every category. All CellarPro wine cooling units are assembled and tested in our state-of-the-art, environment-friendly facility. Each and every wine cooling unit is tested before shipment. Each wine cooling unit is backed an industry-best 5-year warranty on all parts - not just the compressor - and labor to repair the wine cooling unit.

Standard Features:

• 1500 Cu. Ft. Capacity
• Designed to operate in extreme temperature conditions (+115°F)
• High-Performance Compressor
• Oversized Coated Evaporator Coils
• Dual High-Output Centrifugal Fans
• Adjustable Humidity Control via Electronic Display
• Thermostat-Modulated Condensate Evaporator with "On/Off" Control
• 1/2" ID Condensate Fitting and Drain Line
• Variable Speed Settings for Super-Quiet Operation or Maximum Performance
• 54 Decibels at Low Fan Speed
• Ductable Condenser Intake and Exhaust - 100 Equivalent Feet (50 per vent)
• Advanced Electronic Thermostat
• Digital LED Display
• Energy-Saver Mode
• Quick-Chill Mode
• Audible and Visual Alarms
• Min/Max Temperature
• Maintenance-Needed Indicator
• Power On/Off Switch
• Auto-Defrost Cycle
• Stainless Steel Drain Pan
• Removable Steel Case
• Replaceable Condenser Air Filter
• Rechargeable Refrigerant Schraeder Valve
• Adjustable Mounting Brackets
• Vibration-free Operation
• Dual Power Source - Front or Rear
• Compatible with a Dedicated 15-Amp Circuit
• Optional Bottle Probe
• ETL Tested and Certified (UL Standards)

Rear Ducting Hood Custom duct hood for CellarPro 4200VS Series wine cooling units. Includes the rear vent cover and duct plate that attach seamlessly to CellarPro 4200 wine cooling units. Duct openings are designed to attach to two 8" ducts for condenser intake and exhaust. Removable slot plate provides easy access to removable air filter. Can be used with up to 50 equivalent feet of ducting in each direction (100 equivalent feet total). Attaches easily to the rear of 4200 wine cooling units Provides quick access to removable air filter Designed for easy hook-up to 8" ducting One or both openings may be ducted (total of 100 equivalent feet) Powdercoated, cold-rolled, thick-gauge steel

Auxiliary Fan Power Provides switched power for in-line fans in ducted applications. For ducted applications, we offer wiring to provide switched power for auxiliary in-line fans. The power is switched to match the on/off cycle of the wine cooling unit. Please note: Fans must be purchased separately, and should not exceed 3-amps.

Reusable Aluminum Filter Reusable aluminum air filter fits all CellarPro 4200 wine cooling units and is designed for interior or exterior use. Multiple layers of expanded, corrugated aluminum sheets are stacked in staggered directions to let dust and dirt deep into the filter. The filters are reusable, and can be cleaned with steam or hot water spray. Actual length and width are 3/8" less than the size shown. Filters meet UL Class 2 flame retardant requirements. Maximum temperature is 240 degrees. These aluminum filters fit all CellarPro 4200 wine cooling units, and are designed for interior or exterior use. Size: 12" x 12" x 1" Weight: 3 lbs

Cold Temperature Crankcase Heater The self-regulating crankcase heater provides reliable peak heating during critical cold periods, and reduces its heating once the compressor starts up or the air temperature rises. When the cooling unit will be exposed to cold temperatures, the refrigerant in the compressor can migrate into the crankcase oil when the compressor is not running. On startup, this can cause excessive motor wear and a loss of refrigeration efficiency. The crankcase heater is wrapped around the compressor and provides reliable peak heating during critical cold periods, and reduces its heating once the compressor starts up or the air temperature rises.

Alarm Autodialer Critical for expensive wine collections, the autodialer is recommended for wine collectors who travel frequently and/or for wine cellars that are located in warm environments where a power outage or mechanical failure would pose a great risk. The autodialer will call up to 4 phone numbers - programmed in advance by you - to deliver your message that the cooling unit has triggered an alarm and/or the cooling unit has lost power. Directly wired to the cooling unit Calls up to 4 telephone numbers programmed by you Programmable pauses Tone/pulse dialing 9v standby battery backup in case of power outage Wiring exits from the exhaust vent The autodialer must be plugged into an AC outlet and a standard telephone jack.

CellarPro Limited Warranty Information

1800 QTL / QT / XT:  For five years from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any components in the wine cooling unit that prove to be defective in materials or workmanship.

1800 XT-220V: For two years from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any components in the wine cooling unit that prove to be defective in materials or workmanship.

4200VSi / VSx:  For five years from the date of purchase, your CellarPro warranty covers the internal compressor if it proves to be defective in materials or workmanship. In addition, for two years from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any components the wine cooling unit that prove to be defective in materials or workmanship.

For all products covered by the terms of this warranty, CellarPro will repair or replace the original cooling unit with a new or refurbished cooling unit and, once replaced, the original cooling unit must be returned to CellarPro.

All service provided by CellarPro under the above warranty must be performed by CellarPro or a designated repair facility unless otherwise specified by CellarPro. Purchaser is responsible for shipping the wine cooling unit to and from CellarPro or to and from a designated repair facility, and for removing and reinstalling the wine cooling unit from the wine cellar.

The limited warranty applies only to wine cooling units purchased from the factory or an authorized dealer. Damage caused by others or by any cause beyond the control of CellarPro, shall not be considered defects in material or workmanship and are not covered by the warranty. The limited warranty does not cover any parts or labor to correct any defect caused by negligence, commercial use, accident, or improper use, maintenance, installation, service or repair.

THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES, WHICH CELLARPRO WILL PROVIDE, EITHER UNDER THESE WARRANTIES OR UNDER ANY WARRANTY ARISING BY OPERATION OF LAW. CELLARPRO WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE BREACH OF THESE WARRANTIES OR ANY OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights, which vary from state to state.

To receive parts and/or service and the name of a CellarPro designated repair facility nearest you, contact your CellarPro dealer. You may also contact CellarPro directly by calling us at 1.877.726.8496.